Components you'll need:
PVC strip curtains
Mounting components (usually included Using the curtains)
Tape evaluate
Pencil or marker
Drill
Screws
Action 1: Measure the doorway
Utilize a tape evaluate to determine the peak and width with the doorway in which you wish to install the PVC strip curtains. Make sure to evaluate the width in the doorway at the top, Center, and bottom, and utilize the widest measurement.
Phase 2: Reduce the PVC strips to duration
Using the measurements from move 1, Reduce the PVC strips to the right length. When you have loads of strips to cut, think about using a straight edge and also a utility knife to speed up the procedure.
Stage 3: Connect the mounting hardware
Utilizing a drill and screws, attach the mounting hardware to the best on the doorway. Make sure the components is level and safe.
Move 4: Dangle the PVC strips
Start at one particular side with the doorway and hang the PVC strips with the mounting hardware. Be sure the strips are evenly spaced and hang straight. If needed, adjust the strips by sliding them alongside the mounting components.
Stage 5: Trim the strips
If any with the strips are as well extensive, use a check here pair of scissors or simply a utility knife to trim them to the appropriate size.
Move 6: Finish the installation
At the time all the PVC strips are hung and trimmed, ensure that they are appropriately aligned and change them as needed. You may also desire to insert a weight bar to the bottom from the curtains to help keep them from swinging while in the breeze.
Which is it! You now have PVC strip curtains mounted in your doorway.